Bee's Sold.

I guess this is the end of me with her. I hope the new owner will continue the project and making her more attractive and hopefully he'll take a good care of the car. Just got the deposit and once a full payment is made, I shall give the grant to the new owner and also this blog space to the new owner in case he's interested to continue this diary.

A bit hard for me to let Bee's go. Got a lot of good and bad memory with the car. From the first breakdown until the latest one. LOL. How sweet the memory when Mok and me was dating with the car and the experience of doing repairs and undoing repairs with the car is good.

Time for me to move on. The next car? Unknown. No plan yet. Just want to focus on getting some money first before finding a new one.

Till then, see you somewhere else Bee!

DIY : Engine Mounting.

Had nothing to do today, so I force myself to change the engine mounting so that the car will be drivable again. It's a sunny weather today. Quite rare in this month to have a sunny day. Did this from 4.30pm till 7pm. Haha. What I really excited was I did it myself. Without anyone helping. So, plus one into my own experience. Hehehe.

Here's the old rubber mounting. Sliced into half.

Jacking the engine. Using whatever tools that I have.

I removed the water hose, the battery and also the mounting. The hardest part was to remove the bolt due to lack of space. Took me around 1 hour to remove it.

Went to a local spare part shop, got myself a new rubber mounting. And on the right is the fucked up one.

And another 1 hour to fit in the new rubber mounting and adjusting the engine's height to fit it in. Urgh. Really not a good area to work. Too small till cant fit in my hands.

After that, refill back some water into the radiator, put back the battery, and try to start it. Yeah, it worked! And no vibration too. Test drove it and went back to the spare part shop. Initially I just wanted to exchange the starter that I bought the other day with something else, but the owner was kind enough to refund me. Wow, that's something rare also today. I bought a rubber ring to hang up my exhaust, and a H4 bulb for the lamp.

And in case nobody's buying the car, I bought a set of lug nuts for my rear rims. Its a special nut coz the nut have spacer and specially design to fit the rim and not 'boring' the rim holes. Also applied for SSR MKI and etc. And by next month, if nobody's buying the car, I'll send the car to do a proper wiring job, and maybe sending the car to paint shop? Who knows. Huahua.

Time to Move On! Selling my Bee.

Engine:
Mazda UC engine swap. 1.4cc. JPJ endorsed.
Just overhauled. Still in a running in process. Another 600km to go currently.
Oversize piston. Should be around 1.6cc now.
Port and polish.
Head already skimmed. Should be a high compression engine.
Electric fan.
New battery.
Weber DGAV 32/32 still not fitted.
External fuel pump still not fitted.

Handling:
Front : S13 adjustable suspension consist TEIN coil with Kayaba 4x4 Climbing absorber.
Rear : 3 tonne lorry absorber with lowering block.

Transmission:
4 speed gearbox.
Lightened flywheel.
Welded diff.

Interior:
Replica Mazda RX7 semi bucket for driver side.
4-point harness for driver.
Momo dish steering wheel.
White leather re wrap for the whole car. Roof lining, door, and all four seats.
Vacuum meter.
Voltmeter.
Jasma RPM meter.

Exterior:
Front : 13' x 7j -1 Wedsports (Advan A3A shape.)
Rear : 13' x 7j -30 maybe. Dunno what brand.
Duck tail from Honda EG. Still not fitted.
Fender flare.
Rear chrome bumper from RX3 (Rare).
Metal bodywork done to seal holes on the floor.
1.7' exhaust piping with Rotary style exhaust tip.
Refurbished square tail lamp from 818.
All chrome trim and bumper still intact and in good condition.

Reason selling: Upgrading to a better platform.

Price 1: RM 7000 nego.
Extra parts :
Open diff axle with spare leaf spring.
A pair of 13' x 6.5j 'Mangkuk' rim.
Dashboard in the meter area.
Retro wooden steering wheel.
Original steering wheel.
Refurbished original tail lamp.
Spare exhaust tips.
Mazda front emblem.
Rear pillar air vent.

Price 2: RM5000. I will take a few stuffs and replace it with its stock item:
Weber DGAV 32/32 worth RM350.
External fuel pump worth RM120.
Fender flare worth RM300.
13' x 7j -1 Wedsports (Advan A3A shape.) worth RM600.
Refurbished square tail lamp from 818 worth RM200.
Rear chrome bumper from RX3 (Rare). Unknown price tag.
Vacuum meter. Unknown price tag.
Voltmeter worth RM120.
Jasma RPM meter worth RM150.
Replica Mazda RX7 semi bucket for driver side worth RM550.
4-point harness for driver worth RM150.
Momo dish steering wheel worth RM200.

Location : Cheras, KL.

Contact no : 012 72 3345 4, Amar.

Extra notes :
Car's full diary at codenamebumblebee.blogspot.com
Engine still in running in process. Another 600km to go.
Car is rebuild to be a a drift machine but still haven't got a chance to drift it.
All original parts still intact. Only badges missing.
Need a new paint job to make it looks nicer.

Thanks for viewing. Can't stand my parents nagging anymore, so gotta let it go.

Something That's Not So Funny..

What is happening to Bee right now? This is what's happening. Noticed anything different?

Anything now? Yes, the rubber mounting was sliced into half.

Hmmmm. Time to move on perhaps? S13? A31? 910? AE70? TE71? KE70? RX7? I know what's the best solution! Stay away from em'! Hahahahaha. Oh, Im starting to lose my patience. Slowly, and one at a time. Hmmm.

Time To Get Dirty.

Yeah, most probably coz I bought myself a set of tools. Consist a sockets set, Philips and flat head screw driver, a spanar set or whatever you call it, a cutter, and a tool box. Yeay, my semester will be filled with DIY session.

Leaking. Hmmm.

Seriously I cant stand the heat that enter the inside of the car anymore. So back to basic, I'm fitting back the carpet.

After a few minutes, done! Less heat on the floor, less noise and looks much better.

And sealing the wiper area with silicone. I asked Im808 to seal off the vent. I'm doing for a good reason, so that there's no more rain water entering and damaging the firewall.

And its time to fit in back the offset rim. With bald tires!

Jack em up!

How's da fitment? I think OK OK only. Need a trimming when I'm painting the car I guess.

Low enough? Oh, anyone noticed that I remove the flare? Wanna sell it. Huahua.

Not Powerful Enough.

Yep. Not the engine, but the starter. I cant really just crank to start Bee's engine. Im808 told me that the starter is not powerful enough to crank the flywheel (Did I said it right?) due to high compression, so he suggested to change to a high speed starter. Well, this few days, my method to start the engine is by push start. Not the push buton, but to manually push the car!

So, there goes a hundred plus of mine to buy this high speed starter. From Proton Wira. Suppose to fit my engine.

Since I am too lazy to do it myself, I send the car to the workshop and let they do it. So, fitting time.

And what the hell, it didn't fit! Argh, I need to sell the starter since I cant use it. It is for Wira, a reckon brand (I forgot the name), and 3months warranty from the shop. RM120 nett. I didnt take a singe cent of untung. Do tell me if you want it.

And guess what, the main problem was the battery. LOL. After changing to a brand new battery, wallah! Done. No more crank problem. No more ehek-ehek, everything is working normally. Even the old starter. One thing that I can said that time was, FUCK. There goes my money on the starter. Hahaha.

Anyway, the other things that is in my concern now, is a leaking from the bottom of the engine. Hmm. Possible location when I checked yesterday was from the gearbox oil seal, the oil sump gasket, or maybe from the half moon (What is that?). So, will send the car back to Im808 once he's free from activity. Under warranty yo~

Bee's back!

What happened to me on Monday..

2pm - Went to JPJ to renew my road tax.
3pm - Done with JPJ thingy and Im on my way to Pudu to take a bus to Ipoh.
4pm - Reached and by 4.30pm Im on the bus.
8pm - Arrived in Ipoh. Wan Dreamers Vault pick me up and we went to his house.
10pm - Im808 arrived and he picked me up to Sungai Siput which is around 40km away from Ipoh.
11pm - Arrived at his house, get a few things fixed up and the car is ready! Yay. Im808 brief me up bout the car.

12am - Its Tuesday, and Im ready to go back to KL. Will took me 200km to reach KL.
3am - I am 70km away to reach KL and suddenly the car break down. No lights, no rev, nothing. Fuel pump and electric fan is out. I panicked and park the car on the roadside. Its dark, there's no car nearby and Im alone. Muahaha.
3.30am - Called the PLUS Peronda and they arrived. Towed me to the nearest R&R and I slept in the car till morning.
7am - A highway foreman came and try to fix and he blame the wiring for the failure of fuel pump and electric fan. He fixed it and there's no spark in the distributor. He gave up and towed me to the nearest workshop.
9am - Arrived, went for my breakfast and wait for the foreman to come.
10am - They started to find the problem source and found out that the contact point already out and one fuse already blow. Hahaha. The first foreman didn't check out the fuse.
12pm - I'm on my way back to KL with a hope the car will not break down again.
2.30pm - Arrived! Safe and sound!

Total traveling time : 13 hours for 200km trip! One hell of experience.

Early in the morning. I noticed that Bee's rear end sits much lower than front now.


At the workshop..


No more holes.


And no more rain entering the car.


The harness that I bought the other day.


The DGAV Weber and the external fuel pump will be fitted in once I finished the first 1000km.


The wide fender. Touch up? Will do once the car is ready to be painted.


From the front. Wide..


How's the duck tail? OK or not?




And finally, the new engine.


So far so good. Super loud, high compression, and to me its powerful. A few minor problem and the car is good. It needs a new battery, a high speed starter and a proper wiring job. Will update from time to time. And its time for me to active in the blog again since I finished the semester already.

Updates?

The engine is colorful. Im808 said more color surprise soon once the car is done.


Engine work, done. Already inside my Bee. Wiring job almost done. Anyway, how's the fitment?


2 more weeks perhaps. Urgh, so excited. Anyway, I'm looking for a paint shop that have good price and good workmanship. Can recommend one? It's time to give Bee a new skin.

Har Har Har.. Ness. part 2.

I'm busy! That's the reason the blog is left for a while. Anyway, I'm in my final week for my study time. And after that it will be another final examination again. Huhu. One more semester to go! Weee.

Anyway, met with Mr. Redzone today with his 808 wagon. I miss my 808. Damn~ And this wagon is up for sale. Maybe can drop me a comment if any of you are interested with the wagon.

Anyway, the point of seeing him is to get my new stuffs for my 808. And taraa. A set of harness again. And this time, its Cobra brand. Super colorful, like Google theme. Old school type I think. Anyway, how do I assemble and wear this harness? Its 4-point, but there's no buckle. Any idea?

And finally, saw this JDM goodness. Was having my dinner at Mali, and this car was looking for a parking space. Must be imported. Love this Civic! I think it must be imported from US, maybe.

Travellin' In Style..

Hahaha. Conclusion that I can made from this pic is.. Flatbed must be cheaper than towing at Ipoh. Maybe? Or is it becoz of the expired road tax? I'd noticed that the rear suspension is lower than front. Oh well, I miss the car so much. Apart from the sad case of breaking up, this is the one that cheer me up for now.

Body Work..

First of all, thanks to Wan DV of Retro Syndicate for the pictures. I'm guessing the car will be ready by another weekend. From this photos, the results is 'less ideal' than what I expected, or maybe I should wait till I pick up the car. Then maybe I can give some comments. Overall, the body job does make my car more 'beaten' looks. I guess its time for me to keep more money for paint job.

The fender had been aligned back and fitted again. Unfortunately the front fender didn't get the flaring job. Tsk tsk. I'll be using the wide flare back I guess.


And the rear fender got the 'wide' concept. Rims & tyres from Din. Thanks to him the car arrived in one piece.


Another rear shots.


The main problem of retro Mazda is water seeping inside the wiper area. Well, I hope this will last for a while.


Hey Ma, no more rusty holes on the far side!


For now.. I keep my comments first.

Har Har Har.. Ness.

Hargh. Finally. Home sweet home. Gosh, its hard to adapt to non familiar surrounding such as village area and their condition? Was kinda dirty if you asked me. That's my cousin's home. Har har har. How dirty is it? Well, my whole leg had been bitten with this small creature called pepijat I think. Itchy, swollen and anoyying. Damn.. Well, cant complaint much since its not my home.

Anyway, I arrived after 14hours of driving. From Kelantan to Terengganu, then to Pahang, and finally my home. Two sleep-rest, and countless unnecessary stop. And another thing that I bought home is.. Stomach ache! Yep, too much food till food poisoning. But I love the Nasi Dagang! Duit raya that I got is getting lesser and lesser year by year. Its hard to accept that Im getting older. This is the suckest raya ever. Apart from breaking up, some of my relatives didn't come back too. Boredom was killing me there.

Anyway, new stuff for Bee is a 4-point harness. Bought two sets the other day. The black one is for Josh, and the red one is mine. Sorry Josh, yours already opened when I took it, so I use it to take a photo. Hehehe. Still brand new mah!

And after the last MMS that I received from Im808, this is the latest one. Showing that most of the rusty area had been fixed. And the fender is currently going some shaping treatment I think.


Remember my fucked up firewall? No more now.
Oh, I think I need to realize something that I had been focusing too much on my car till Mok is bored and leaving. So I guess, no more car topic when I got a chance to talk to her. I hope there's still chances left for me. Oh, how I wish I can turn back the time. Hope. Hope. Too much hope till it sounds like hopeless.

Scrap Huntin' Raya Edition.

After a few times (Tutup Raya maa!) visiting the same scrapyard, today I went again and lucky me, the shop is open. So, went to find a few stuffs. Not lucky me, most of the wanted stuffs had already been taken by Kamachi. Chet. The shop that I visited just now is one of the Kamachi's supplier. All Weber, rims, and rare stuffs had been taken by them. Haiya..

Since the owner of the shop had been following & helping me finding stuffs, its kinda rude if I didn't buy anything. So, just took this steering which is from Datsun and also this Honda Mugen spoiler. The EG hatchback one. Still got the Mugen emblem too. And come and guess the prices?


I guess I'll try to alter the tapak for the spoiler, and the steering will be refurbish and will be used for drifting purpose since my current one has too much offset till not suitable for fast steering work. Prices again? Less than a single purple note. Damn good buy I guess.

And finally, one and only 808 that I found during my Raya's trip. A coupe with TS Cup looks. Already chat with the owner, and he gave me the scrapyard location. I'll definitely will come back to the scrapyard next year!





Gosh I miss my car soo much. Im808 said the car will be done by next week....End. Sigh. I guess you cant rush perfection right? Kekeke.